Request QuoteQuote

Resource CentreNews

ASELSAN localisation award presented to Inventra at SAHA 2026

At the award ceremony of ASELSAN’s 1000 Ürünle Millileştirme Yolculuğu localisation programme, Inventra Mühendislik A.Ş. was recognised in the highest-value exporter category.

Basar SenSystems Engineer

The award presentation at ASELSAN’s stand: four people, one holding the plaque, in front of a screen reading “1000 Ürünle Millileştirme Yolculuğu — Ödül Takdim Töreni — En Yüksek Tutarda İhracat Yapan Firma Kategorisi — İnventra”.

Inventra Mühendislik A.Ş. was recognised in the En Yüksek Tutarda İhracat Yapan Firma — highest-value exporter — category at the award ceremony of ASELSAN’s 1000 Ürünle Millileştirme Yolculuğu localisation programme. The plaque was presented at SAHA 2026.

What the plaque says

The plaque carries the ASELSAN logo, the SAHA 2026 emblem and three lines: the name of the localisation programme, the award category, and İnventra Mühendislik. Which period the category covers, and against which set of companies it was assessed, is not written on the plaque and is not written here either.

Products on the show floor

The frames below show the ACP20 portable climatic rack cabin, the MMS20 telescopic mast and the SEG14 stabilised gimbal.

Gallery

  • The plaque in its open presentation case: a hand-painted Iznik tile panel on the left, and engraved text on the right reading SAHA 2026, the localisation programme name, the award category and Inventra Mühendislik, above the ASELSAN logo.
  • Two sand-coloured wheeled rack cabins standing closed side by side on the exhibition stand floor.
  • The front face of a rack cabin, with its control panel and ventilation grille visible; a second cabin stands behind it.
  • Two rack cabins seen from the rear quarter, one showing its ventilation grille, with visitors moving through the hall behind.
  • Two rack cabins on the stand, the nearer one with a side panel removed.
  • A rack cabin with its door removed, showing the 19-inch rack fitted with patch panels, a switch, a connector panel and an emergency stop button.
  • Two rack cabins photographed from the stand aisle, with the red carpet of the hall in the foreground.
  • An open rack cabin showing its fitted equipment, standing next to a closed cabin against the stand wall.
  • Two rack cabins on the stand, the open one showing its rack fit-out, with display screens behind them.
  • Two closed rack cabins standing side by side, with visitors in the hall behind them.
  • An open rack cabin beside a closed one, the rack equipment and cabling visible through the opening.
  • Two rack cabins seen from behind, showing the ventilation grille and the rear access panel.
  • A telescopic mast raised from the bed of a pickup on the outdoor display area, carrying a payload at its head.
  • A tracked unmanned ground vehicle on the indoor stand, carrying a mast-mounted stabilised gimbal above its hull.
  • Close view of the stabilised gimbal at the head of the vertical mast, its optical apertures and laser rangefinder window facing the aisle.
  • The gimbal and its mast seen from the front, with stand visitors talking around the vehicle.
  • The tracked vehicle photographed along its length, the mast and gimbal rising from the rear deck.
  • The gimbal head at the top of the mast, seen from below against the hall lighting.
  • The tracked vehicle on the green display floor of the stand, mast raised and gimbal facing forward.
  • The mast and gimbal beside a Turkish flag on the stand, with visitors in the aisle behind.
  • Two masts standing on the stand, the nearer one carrying the gimbal, with an equipment case open in the foreground.
  • The gimbal at close range on its mast, the vehicle deck and its stowed equipment visible below.
  • The mast base and the vehicle deck, with the gimbal above and stand visitors behind.
  • The tracked vehicle seen from the side with the mast fully raised, the gimbal at its head.
  • The gimbal on its mast above the crowd, photographed from the stand aisle.

Technical Discussion and Quotation

Tell us the platform and the constraint. Our engineering team answers with a configuration that fits it, usually within two working days.

Request Quote

More from This Section

News